Node Replacemen in HP 3par 7200

[ehsankhayyat]

Hi every body,

I have got an error on my node 1 of my storage.The status of LEDs on failed node was : status : on ( green without flashing)  , UID : on (blue without flashing ) , fault : on ( amber without flashing).According to the maintenace guide , it is ready to remove the node.So I remove the node and replace it with new one.All connection and cables are okey like faulty node.But this new node do not join to the cluster and LEDs are : status : on ( green without flashing) , UID : off , fault : off.I remove the node and reinstall it to the cage but the error it still remain.

Do you have any experience like  me ?

Please help.

Best regards.

[ehsankhayyat]

Hi Everybody,

I received below message in GUI after replacing the faulty node :

" Node 1 rescue failed due to being unable to retrieve kernel over udp port 69.the node may not be properly connected to the network."

any comment !

best regards.

[Mikemakers]

Hi,

did you find out what was your problem? if your answer is yes would you please explain to me how did you fix it?

regards

Mike Makers

[Torsten.]

You need to connect the mgmt cable before inserting the node.

The new node will receive a clone of the running OS and all needed settings from the master node.