HPE 3PAR StoreServ Storage

Require :8080 to be added

New Member

Require :8080 to be added

Hello there!
I have a customer that system report was set up for, in 3PAR 
The URL link in the scheduled report email does not work unless we added :8080 after the hostname. Is there a configuration file that has been over looked when setting this up?  
Thank you
P.S. This thread has been moved from Disk-Based Systems > Disk Array > to Storage Area Networks (SAN) (Enterprise). -HP Forum Moderator

Re: Require :8080 to be added

Hi PS,



The Schedule report e-mail link must contain HTTP port number on which the web server listens. This is observed
if the apache server is configured to a port other than 80


This is fixed by providing additional configuration variables in the config.tcl, under the 3PAR-rpt directory. If the apache server is configured for a port other than 80, the entry "set Sysdb::httpdport <port>” in config.tcl, under the 3par-rpt directory, must have an appropriate port number as part of the configuration




i Work for HP
Prakash Singh_1
Esteemed Contributor

Re: Require :8080 to be added




You can also try to edit the file C:\Program Files (x86)\Apache Software Foundation\Apache2.2\conf\httpd

Modify the value of Listen as you prefer # Change this to Listen on specific IP addresses as shown below to


# prevent Apache from glomming onto all bound IP addresses.






Listen 8080


I woiuld also  suggest to check if the new port (ie 80) you would like to use is free by


telnet hostname 80



I work for HP



To assign points on this post? Click the white Thumbs up below!