StoreServ 7200 Installation Issues

[CraigV]

Hi All,

Busy rolling out our demo 3PAR 7200, but we have the following issues:

1. When trying to use the physical SP, we get as far as the error below:
Probing EDD (edd=off to disable)

We aren't booting off a USB key, and are using a physical HDD instead. Turning the USB mode on/off makes no difference.

2. When trying to use the virtual SP, after importing it into vSphere 5.1 and starting it up, we get the error in the image attached, and are unsure where to proceed. The VSP is attached to the same virtual network as the 3PAR...

However, we can go no further. Any idea on how to fix this?

Thanks!

P.S. This thread has been moved from Storage > Disk > Disk Array to Storage Area Networks (SAN) (Enterprise) - HP Forums moderator

[Torsten.]

nothing attached?

[CraigV]

...forgot to add the attachment! By hitting that clear-as-day button! Should be up now!

[Torsten. · Accepted solution]

You need to do a file system check (fsck) manually now.

#  fsck –yvf /dev/sda*    

# reboot

[CraigV]

Thanks! Will try this in the morning and feed back here.