SOLVED
Hello Oyvind,
SSMC 3.8.2.0.39 is the version that you get when downloading 3.8.2 . This is NOT the latest one.
The latest SSMC version which includes the log4j security fixes is SSMC 3.8.2.1.
As you are currently running 3.6.1, the supported upgrade path would be:
3.6.1 --> 3.8.0 --> 3.8.2.1
Before you upgrade do the following.
1. make a snapshot of the current 3.6.1 VM
2.reboot the 3.6.1 VM and verify that after the reboot SSMC is properly working.
3. follow the upgrade instructions from the 3.8 admin manual (Section Upgrading SSMC appliance of the following link) and upgrade to 3.8.0 and then to 3.8.2.1:
https://support.hpe.com/hpesc/public/docDisplay?docId=a00117431en_us
If anything happens during the upgrade do a restore of your VM-snapshot.
Alternately install a fresh 3.8 SSMC appliance, and upgrade 3.8 to 3.8.2.1.
You can run the new SSMC in parallel to the 3.6.1 appliance, until you have verifed that the new appliance works.
Hope that helps.
Hello again.!
Im failing in first step. In the HPE SSMC 3.8.X Administrator Guide, upgradring SSMC appliance, it says:
To upgrade SSMC appliance, follow these steps:
Log in to SSMC Administrator Console.
Click Actions > Upgrade.
But I dont see the Actions button?Screenshot
When you login to the administrator console then you will need to
1. On the main SSMC-GUI page, enter user "ssmcadmin" with the password of that user
2. click on the check box that reads "Administrator Console".
After login, the ssmc-GUI will then show you the list of connected arrays.
At the right upper corner there is a green "Actions" button, and if you click on that you should get a menue with "Upgrade".