hard storage limit csi driver for 3par

[anto_mac]

When trying to create a persistentvolumeclaim of 100MB where 3par is the underlying storage. The PVC creation is failing. There appears to be a hard limit of 256MB.  Wondering why there is a hard limit rather than an auto-increase to the minimum size. This appears to be the case with other CSI drivers 

[sbhat09]

Hello Anto,

I think the present value for the pvc is set to 256MB. Please try to edit the 'pvc***.yml' file and set the storage class to 100MB.

You may find this article useful:

https://community.hpe.com/t5/Around-the-Storage-Block/How-to-Persistent-Volumes-with-the-HPE-3PAR-Volume-Plug-in-for/ba-p/7060079#.YJkev7UzaUk

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!

[anto_mac]

Hi,

I don't think that will work as 3par itself as a minimum volume size of 256MB. The issue I have encountered is that 3par csi driver should be able to create a volume with the minimum size even f the volume is not the minimum specified in value file.

i.e i

have a volume size in my chart of 100MB but the 3par csi driver is capable of creating as 256MB it's the minimum size.

Regard

[Josh94K]

Hello @anto_mac 

Please find the link to a document that might probably help you. 

https://scod.hpedev.io/learn/persistent_storage/index.html#persistent_volumes

Hope this help @anto_mac 

If you feel this was helpful please click the KUDO! thumb below!

[Josh94K]

Hello @anto_mac 

Hope you are doing well, !

Just following up to check if the issue is resolved, or if you have any additional query. !.

Regards
Josh.