hp 3 PAR Storeserv 7000

[hedi]

hi;

how to do for first access to hp 3 par storeserv 7000;

[Torsten.]

It is worth to have a look into the install manual - set up the (virtual) SP, then use a windows server and start the wizard.

[Rajiv]

You'll find the StorServ Manuals here:

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/manualsResults/?sp4ts.oid=5335712&spf_p.tpst=psiContentResults&spf_p.prp_psiContentResults=wsrp-navigationalState%3Daction%253Dmanualslist%257Ccontentid%253DSetup-and-install-general%257Clang%253Den&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

You may wish to refer to Smart Start Guide in case you need to setup using Smart Start.

Thanks,

Rajiv

[Sheldon Smith]

If you are trying to set an HP 3PAR StoreServ array up, consider getting installation and implementation assistance services from HP.

If you are trying to login to one that's running, you will need the following information:

• IP address of the StoreServ array
• valid username (for example, 3parbrowse)
• valid password

Then you either need the GUI interface, the HP 3PAR Management Console, or CLI interface. You can use a SSH terminal program (for example PuTTY) if you want to try the CLI interface.

Note: While I work for HP, all of my comments (whether noted or not), are my own and are not any official representation of the company.
----------
If my post was useful, click on my KUDOS! "White Star" !

[Prakash Singh_1]

Hi,

For HP 3PAR storage system querries you can also visit the HP Guided troubleshooting tree.

Below is the link for 3PAR HPGT:

http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-905&h_lang=en&h_cc=us&h_product=304617&h_audience=smb&h_client=s-h-e010-1&h_audiencerestrict=true&lang=en&cc=us

HP Guided Troubleshooting Solving issues