hpe 3par storeserv file controller v3 Iscsi Target Issue

[SandipSaha]

Dear Member,

Is there a limit to the number of ISCSI target ,

we have 2 number of iscsi LUN over microsoft cluster server and those assing to 16 number of Esxi host. But problem is after

8 host its not support

windows 2016 storage server (hpe 3par storeserv file controller v3 )

esxi 6.7

[srinatha_joshi]

Hi Sandip,

Good day :)

There are some limitations with iscsi taget connections.

Supported and tested Microsoft iSCSI Software Target 3.3 limits :
Initiators that can connect to the same iSCSI target instance 16

When used with MPIO, you can connect no more than 4 sessions per initiator.

As currently you are saying 8 hosts connected and 8 hosts not connected.

This looks you may be using dual paths connection for same target which is allowing 8 hosts.

there is enforced limit 16 initiators per target.

Hope this answer is helpful for you.

thank you!
I am an HPE employee

Was the post useful? Click on the while KUDOS! Thumb below. Kudos is a ways of saying thans you to a post.

[SandipSaha]

Hello,

Thanks For reply i am tested in dual path you r correct its working all 16 host but in microsoft page Microsoft iSCSI Software Target 3.3 is showing for windwos 2008R2 but we are useing windows 2016 storage server.

i cant find any limite on 2016

please help any suggession.

Thanks

Sandip

[srinatha_joshi]

Hi Sandip,

There are no changes with iscsi limit, it is generic with iscsi limit and not specific to OS.

As i found no other documentation specific to Windows 2016 with any changes observed.

Thanks.

Best Regards,

Srinatha Joshi