showportlesb reset command does not work

[hirohara]

Hello,

I run showportlesb reset command, but counuter did not reset to 0.

Is that a bug?

cli% showportlesb reset
Saved Loop <1:1:2>
Saved Loop <1:1:1>
Saved Loop <0:1:2>
Saved Loop <0:1:1>

cli% showportlesb hist 0:0:1
:
Aug 08 13:46:20
ID ALPA ----Port_WWN---- LinkFail LossSync LossSig PrimSeq InvWord InvCRC
<0:0:1> 0x11400 20010002AC022863 3020 681404 221 0 141126584 7610
host1 0x11600 500143800251DDB4 55 13 13 0 22 0
host0 0x11700 50014380062D78DE 8 2 2 0 0 0
host 0x10f00 5001438034427E0D 2 1 1 0 0 0
host2 0x10800 2100001B32096AE0 3 0 0 0 0 0
host2 0x10900 2101001B32296AE0 4 0 0 0 0 0

Regards,

Yasushi

[sanj_s]

Hello Hirohara,

To reset the values in the counter the respective node needs to be restarted, as one can compare with the previous value.

The showportlesb reset command resets the internal LESB counter by comparing the current value and previous value and raise the alert. ny change in the counters will be recorded in the event log.

I hope this answers the question.

Regards,

I am an HPE Employee

[hirohara]

Hello sanj_s,

Thank you for information.

I've done showportleseb reset and shutdownnode reboot command, but the value in the counter for showportlesb did not show to zero.
Should I have power cycle for StoreServ?

And also, how can I check internal LESB counter?
I reviewed the showeventlog -debug output, I did not know which log.

Best Regards,
Yasushi

[sanj_s]

Hello Hirohara,

There are following counters

" <0:1:1> 0x40000 20110002AC005191 1 3 0 0 14 0 " ,      These are 3par array host port counters .
"  host10 0x60401 20000025B5B0A0FF 0 29 32 42 0 0 " , These are the Host Hba counters.

The 3par counters can be reset by rebooting the node

The host counter can be reset by restartig the host. 

Regrads,

I am an HPE employee.