11.31 Install on a L2000

[Stephen Grecni]

When installing 11.31 on an older L2000 server
I receive the following error msg:

alloc_pdc_pages: Relocating PDC from 0xf0f0000000 to 0x7eb00000.
DoCalllist done

I understand that this is caused by an needed firmware upgrade or a incompatable server model.

My question is, is a L2000 a RP7400 or a RP5400 ? Both are incompatable with 11.31 from what I read. I'm just curious on how to tell the proper model types.

Thanks,

Steve

[Torsten. · Accepted solution]

The L2000 is aka rp5450.

BTW, not supported with 11.31.

[Pete Randall]

Steve,

According to page 3 of the below pdf, the L2000 is not supported under 11.31.

http://h20338.www2.hp.com/hpux11i/downloads/public_hp-ux_systems_s upport.pdf


Pete

[Stephen Grecni]

Thanks for the quick response.

[Scot Bean]

"Relocating PDC" is a routine firmware message for the L2000 and similar PA-RISC servers.