HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

11.31 Install on a L2000

 
SOLVED
Go to solution

11.31 Install on a L2000

When installing 11.31 on an older L2000 server
I receive the following error msg:

alloc_pdc_pages: Relocating PDC from 0xf0f0000000 to 0x7eb00000.
DoCalllist done

I understand that this is caused by an needed firmware upgrade or a incompatable server model.

My question is, is a L2000 a RP7400 or a RP5400 ? Both are incompatable with 11.31 from what I read. I'm just curious on how to tell the proper model types.

Thanks,

Steve
4 REPLIES 4
Torsten.
Acclaimed Contributor
Solution

Re: 11.31 Install on a L2000

The L2000 is aka rp5450.

BTW, not supported with 11.31.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Pete Randall
Outstanding Contributor

Re: 11.31 Install on a L2000

Steve,

According to page 3 of the below pdf, the L2000 is not supported under 11.31.

http://h20338.www2.hp.com/hpux11i/downloads/public_hp-ux_systems_s upport.pdf


Pete

Pete

Re: 11.31 Install on a L2000

Thanks for the quick response.
Scot Bean
Honored Contributor

Re: 11.31 Install on a L2000

"Relocating PDC" is a routine firmware message for the L2000 and similar PA-RISC servers.