HPE 9000 and HPE e3000 Servers
1752625 Members
4311 Online
108788 Solutions
New Discussion юеВ

Re: 9000/827 H20 Nova console connection

 
Vince Martyn
New Member

9000/827 H20 Nova console connection

Hi folks,

I have just started in a new position, and the company has a 9000/827 H20 sitting idle, and I am trying to see if it will run.

My problem is, I am used to this 'sort' of harware but in the HP3000/9xx style.

So I don't know how the console connects!

I have a cable which is partnumber 5062-3074 which connects a 78 pin D type to a D9 labelled ADP, but I don't know what an ADP is, or if I can connect this to a 700 series terminal.

Can someone help with these questions...

1) What is an ADP?
2) Is 5062-3074 all I need to connect the console?
3) What is pin 70 of the 78 pin connector doing, as this has broken off!
4) How does a serial console connect to an 827?

Thanks.
Vince Martyn.
7 REPLIES 7
KapilRaj
Honored Contributor

Re: 9000/827 H20 Nova console connection

I think the term ADP is MDP and it's Zero'th port you can connect a 25 pin serial cable to a dumb terminal

Regds,

Kaps
Nothing is impossible
Vince Martyn
New Member

Re: 9000/827 H20 Nova console connection

Hi,

Thanks for your reply, but the only info I have is the cable, and it's D9 connector has ADP moulded into the plug.

But as I said, there is a broken pin.

I have tried putting an A1703-60003 board from an MPE system into the 827. It comes up and I can get into the IPL my problem occurs when I try to boot.

I get a few messages, then a line of numbers and it seems to hang there.

Vince.
Vince Martyn
New Member

Re: 9000/827 H20 Nova console connection

Hi Folks,

I have found another thread that answers some of my questions...
subject: HP 9000 E55 with A1703-60022

ADP stands for 'Active Distribution Panel'.
I need one of these to connect the console to an A1703-60022.

But now I am trying an A1703-60003 I have a mini-din serial console connector.

Should this card work ok in a hpux machine, and would swapping these boards cause boot to hang?

Best regards
Vince.
SureshKumar_2
Valued Contributor

Re: 9000/827 H20 Nova console connection

Partnumber 5062-3074 -> Cable assembly - 78 pin (M) connector with thumbscrews to DB-9 (F) connector - 3.9m (12.9ft) long

ADP II -> as Mux Panel or MDP (Modem Distribution Panel)

U have to connect this particular cable from server to MUX. and from MUX u have to connect the console on port 0

U can also find some useful urls:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=379926

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=44021

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=81573

Hope these will help u

suresh
Things are very easy, when u know about it...
malvin drakley
Esteemed Contributor

Re: 9000/827 H20 Nova console connection

Hi Vince, wherabouts in the UK are you? might know someone who could help depending on where you are

cheers
malvin

malvind@tindirect.com
Not me Chief, I'm Radar
Vince Martyn
New Member

Re: 9000/827 H20 Nova console connection

Hi Malvin,

For work I am in Burnham, to the west of Slough. Is that good or bad?

Thanks,
Vince.
malvin drakley
Esteemed Contributor

Re: 9000/827 H20 Nova console connection

that's good, please mail me
cheers
malvin
Not me Chief, I'm Radar