HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

ATTN Light comes on after reboot

 
SOLVED
Go to solution
Douglass Anderson
Regular Advisor

ATTN Light comes on after reboot

I have a T520 with HPUX 11i V1.

When I reboot I get an ATTN Light.
See attached Tombstone.

How can I stop the ATTN Light from coming on?
What is it complaining about?
16 REPLIES 16
James George_1
Trusted Contributor

Re: ATTN Light comes on after reboot

Hi

You can clear it from your MP console / GSP login.

On your console, CTRL B and login to the MP console.

Then select S L and read the logs and the ATTN light will go away.

Rgds / James
forum is for techies .....heaven is for those who are born again !!
Torsten.
Acclaimed Contributor
Solution

Re: ATTN Light comes on after reboot

Dinosaurs are still alive!

I don't remember most details about this "box", but if the OS is running, can you see any related message in syslog, dmesg or diagnostics?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: ATTN Light comes on after reboot

To all who want reply:

There is no GSP or MP here.

This box is a "bit" older, docs are here:

http://docs.hp.com/en/hw.html#T-Class%20Server

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
James George_1
Trusted Contributor

Re: ATTN Light comes on after reboot

Sorry, didn't notice the m/c model !!!

James
forum is for techies .....heaven is for those who are born again !!
Torsten.
Acclaimed Contributor

Re: ATTN Light comes on after reboot

You should try to find the reason for that warning, this document may guide you and give a little help:


http://docs.hp.com/en/1019/A1809-90009.pdf

Monitoring Hardware Status - chapter 2 2-7

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!