HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Activate Snd CPU HP 9000 R380

 
CSP_ALGERIA
Frequent Advisor

Activate Snd CPU HP 9000 R380

Hi,
1 - How we can know if the second CPU on HP 9000/R380 is working ,as we installed a new software (built with informix...)our sever is 512 Mb RAM with two HDD 9 G0 (Vg00 for HP-UX;Vg01 for database)itb works slowly as we compare it with an IBM eServer 6xx series...?
2 - Can we install a DDS3 DAT ?
thnaks for replays !
Nothing in the world can take the place of persistence.
6 REPLIES 6
DCE
Honored Contributor

Re: Activate Snd CPU HP 9000 R380


1. Easiest way is to run top - if two cpus show up, then they are both active

2. yes- if you have the correct scsi card installed
CSP_ALGERIA
Frequent Advisor

Re: Activate Snd CPU HP 9000 R380

Thanks for your replay,But i add :
I am running HP-UX yougo B.11.00 U 9000/800 2013471883 licence pour un nombre illimité d'utilisateurs.
I a do the cmd as you wrote me but no way for -if but i have some things like this: see attached file pls.
bye!
Nothing in the world can take the place of persistence.
Torsten.
Acclaimed Contributor

Re: Activate Snd CPU HP 9000 R380

1) No need to discuss the performance of this dinosaur, it has 180MHz only.

There was a 1 CPU model and a 2 CPU model.

Try to run

echo "selclass qualifier cpu;info;wait;il"|cstm

this will show you the number of installed CPUs, even if 1 is disabled.

To be sure, please run "model" and post the result.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: Activate Snd CPU HP 9000 R380

Regarding the "How to install the DDS drive into the R-Class" see this manual:

http://docs.hp.com/en/A3262-90005/A3262-90005.pdf

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Josiah Henline
Valued Contributor

Re: Activate Snd CPU HP 9000 R380

/sbin/ioscan -fCprocessor

This will list processors and is not dependant on anything other than a base OS install.
If at first you don't succeed, read the man page.
DCE
Honored Contributor

Re: Activate Snd CPU HP 9000 R380


The top command shows only one cpu - you can use the ther commands to see if the second one is present, but disabled