HPE 9000 and HPE e3000 Servers
1752571 Members
5120 Online
108788 Solutions
New Discussion юеВ

Re: Adding RAM in RP8400 Server

 
chandra Sekhar_7
Frequent Advisor

Adding RAM in RP8400 Server

Hai Guys,

I has to be add 8gb Ram on RP8400server

please any one help me how to add RAM step by step please.

Regards
Chandra
6 REPLIES 6
Yogeeraj_1
Honored Contributor

Re: Adding RAM in RP8400 Server

Hi Chandra,

Questions:
1. How much memory do you already have on the server?

Normally the rp8400 supports from upto 64 GB.

2. Have ou already acquired the memory modules?

Supported product numbers are: A6097A, A6098A and A6100A.

hope this helps!

kind regards
yogeeraj
No person was ever honoured for what he received. Honour has been the reward for what he gave (clavin coolidge)
Yogeeraj_1
Honored Contributor

Re: Adding RAM in RP8400 Server

hi again,


also found this interesting document:
http://h18000.www1.hp.com/products/quickspecs/11894_div/11894_div.HTML


Basically the following memory loading rules should be obeyed:


Memory must be installed in quads (4 DIMMs of equal density)

Memory is available in four densities: 2 GB (4├Г 512MB), 4 GB (4├Г 1024MB), 8 GB (4├Г 2048MB), and 16-GB (4 x 4096MB)

Minimum memory is 2-GB per cell

Maximum memory per system is 256 GB-using sixteen 16 GB Quads.

On each cell board, Memory Quads must be installed in the following order:
1st (0A, 0B, 1A, 1B), 2nd (2A, 2B, 3A, 3B), 3rd (4A, 4B, 5A, 5B), 4th (6A, 6B, 7A, 7B)



hope this helps too!
kind regards
yogeeraj
No person was ever honoured for what he received. Honour has been the reward for what he gave (clavin coolidge)
chandra Sekhar_7
Frequent Advisor

Re: Adding RAM in RP8400 Server

Dear Yogeeraj,

Thanks for u r responce

Now server having 8GB RAM Single module.

We brougt 8GB RAM Siglemodule only.

how to add the RAM in Step by step please tell me.
How to disable the slot & how to enable slot after installed RAM By step by step.

Regards
Chandra
melvyn burnard
Honored Contributor

Re: Adding RAM in RP8400 Server

You can get manuals for this server at
http://docs.hp.com/en/hw.html#HP%209000%20rp8400%20Server

Also, you should consider awarding points to those who help:

I have assigned points to 1 of 33 responses to my questions.
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
timmy b.
Honored Contributor

Re: Adding RAM in RP8400 Server

How many cells in your partition?
How much memory on each cell?
What are the sizes of the existing memory?

Need this info to be able to tell you where to put the new memory.
There are 10 kinds of people in this world: Those who understand Binary, and those who don't.
tkc
Esteemed Contributor

Re: Adding RAM in RP8400 Server

is your 8GB memory consists of 4 x 2GB, 8 x 1GB or 16 x 512MB ?

you must install 4 DIMMs at a time.

must be installed in the following order:
- 1st (0A, 0B, 1A, 1B
- 2nd (2A, 2B, 3A, 3B)
- 3rd (4A, 4B, 5A, 5B)
- 4th (6A, 6B, 7A, 7B)