HPE 9000 and HPE e3000 Servers
1748093 Members
5815 Online
108758 Solutions
New Discussion юеВ

Atention led blink

 
SOLVED
Go to solution
I.Delic
Super Advisor

Atention led blink

Hi,

i did not use my systeem a long time.
I forget who i can check what is wrong whit my systeem. I don't know how to log on in to console to check my alert's.

really messy of me but it is true

all settings are default

Can you help me

p.s i have checked sys log en i don't see the wrong things
10 REPLIES 10
Mridul Shrivastava
Honored Contributor

Re: Atention led blink

What's the server model?
You can tru telnet GSP/MP Lan and check logs using SL and acknowledge them, if possible capture them and post.
If GSP/MP Lan is not available then try connecting laptop/PC to serial console port using Y cable and use hyperterminal to access the console.
Time has a wonderful way of weeding out the trivial
BPatrick
Trusted Contributor

Re: Atention led blink

Hi Delic,

You can telnet to MP. Enter SL -> E -> D to dump all the logs.
It is better to check for any events with severity greater that 3.
The system lights flash when a event with severity greater than 3 occurs.


Patrick
I.Delic
Super Advisor

Re: Atention led blink

i'm in my server room . i don't have to use telnet.

But i don't kwnow how to start GSP/MPL

Do i have to log on as Root of is ther an onther way

thank you in advance

Idriz
JASH_2
Trusted Contributor

Re: Atention led blink

I.Delic,

The default password and login name for the MP screen are:-

Admin
Admin

Then look at the logs with:-
SL
E

Regatrds,

JASH
Got timeout, sorry if second post.
If I can, I will!
BPatrick
Trusted Contributor

Re: Atention led blink

Delic,

Connect a PC or laptop to the MP Lan console using a crossover ethernet cable or a serial cable. Set the IP address of your laptop to be of the same subnet as the ip address of MP(say 192.168.0.*).
The from your laptop do a telnet to the MP IP address. it will prompt you for a username/password.
Default is Admin/Admin
If you dont have IP address for MP, it will be most likely labeled near to the MP lan console port by your vendor.

Cheers

Patrick
I.Delic
Super Advisor

Re: Atention led blink

Patrick,

i don't have to connet nothig ( i guess) . I have console screen with keyboard.

Do i have to logon just as root and then to MP

My unix box is 5450

Idriz
Mridul Shrivastava
Honored Contributor
Solution

Re: Atention led blink

If u have console then press Ctrl + B then it will prompt for username and password for GSP, can give Admin/Admin ( this is default one).
Time has a wonderful way of weeding out the trivial
BPatrick
Trusted Contributor

Re: Atention led blink

Yes you can login to the console as root. then press ctrl+B and login to MP using Admin/Admin
Victor BERRIDGE
Honored Contributor

Re: Atention led blink

Hi,
At the console , just do
to get to the GSP, then
at login I dont know if you configured , if not
then once in GSP type SL
e
Dont forget Quit -> q
co to return to console


All the best
Victor