Attn light flashing on N4000 server

[Steven Jenner]

Hi, the ATTN light has started flashing on a N4000 server that I am responsable for. Unfortunately I have no documentation available and cannot locate any on the web. Does anyone have details of where I can download documentation, or details of a troubleshooting procedure I can carry out. I have searched the HP site to no avail.

[Robert-Jan Goossens · Accepted solution]

Hi Steven,

"Attn." led flashing means there are some warnings in your box such as power interrupt. Go to your consoleand

Press Ctrl+B , go into GSP mode, then type:
GSP>sl

Select "e" to view the error log.
GSP>co
Now the "Attn." will turn off.

Regards,
Robert-Jan

[Ashwani Kashyap]

THe attention light is flashing because there are logs in the GSP that have nopt been read or cleared . You need to read and clear those logs .

As mentioned in the earlier post , go to console , then press ctrlB to come to gsp prompt . Enter your user name and password if you have one , or just press enter twice . YOu will be in the gsp .

From their do sl for show logs ( type HE to get a complete list of comamnd ).

GSP will tell you exactly what to dowith logs whther to acknowledge , clear or remove . YOu can acknowledge and alear all the logs .
Once done type "co" to come back to console prompt .

[Michael Steele_2]

In addition, when reviewing the GSP error log, post anything above ALERT LEVEL 10 or 11.