HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Attn light flashing on N4000 server

 
SOLVED
Go to solution
Steven Jenner
Occasional Visitor

Attn light flashing on N4000 server

Hi, the ATTN light has started flashing on a N4000 server that I am responsable for. Unfortunately I have no documentation available and cannot locate any on the web. Does anyone have details of where I can download documentation, or details of a troubleshooting procedure I can carry out. I have searched the HP site to no avail.
3 REPLIES 3
Robert-Jan Goossens
Honored Contributor
Solution

Re: Attn light flashing on N4000 server

Hi Steven,

"Attn." led flashing means there are some warnings in your box such as power interrupt. Go to your consoleand

Press Ctrl+B , go into GSP mode, then type:
GSP>sl

Select "e" to view the error log.
GSP>co
Now the "Attn." will turn off.

Regards,
Robert-Jan
Ashwani Kashyap
Honored Contributor

Re: Attn light flashing on N4000 server

THe attention light is flashing because there are logs in the GSP that have nopt been read or cleared . You need to read and clear those logs .

As mentioned in the earlier post , go to console , then press ctrlB to come to gsp prompt . Enter your user name and password if you have one , or just press enter twice . YOu will be in the gsp .

From their do sl for show logs ( type HE to get a complete list of comamnd ).

GSP will tell you exactly what to dowith logs whther to acknowledge , clear or remove . YOu can acknowledge and alear all the logs .
Once done type "co" to come back to console prompt .
Michael Steele_2
Honored Contributor

Re: Attn light flashing on N4000 server

In addition, when reviewing the GSP error log, post anything above ALERT LEVEL 10 or 11.
Support Fatherhood - Stop Family Law