HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

BTU Ratings on HP UNX Servers

 
Highlighted
mprensky
Occasional Contributor

BTU Ratings on HP UNX Servers

I am having some difficulties finding the BTU Ratings for all the servers we have in our data center. None of the specs I have looked at online address that rating at all. Here is the list of servers that I have. If anyone can point me in the right direction to find out this information, I would appreciate it.

L1000
L2000
rp5400 Series
rp8400 Series
2 REPLIES 2
Angus Crome
Honored Contributor

Re: BTU Ratings on HP UNX Servers

Check out this thread....

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=112587
There are 10 types of people in the world, those who understand binary and those who don't - Author Unknown
Florin Voicu
Occasional Advisor

Re: BTU Ratings on HP UNX Servers

L1000 - see above mentioned link (3355 typical for 440 and 330Mhz)
L2000 - same for typical (4380 for maximum)
rp5400 - similar as L1000
rp5470 max=4380; rp5430 max 3355
rp8400: 9700(typical)- 16000(maximal) calculated values