HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Boot IS Blocked Error in RP8400

 
ajin
Frequent Advisor

Boot IS Blocked Error in RP8400

Boot IS Blocked Error in the cellboard-2 appears while powering on the server.For reference I have attached the Output of VFP,Errorlog,SYSREV,PS and CP.Please help to solve this issue..
2 REPLIES 2
Asif Sharif
Honored Contributor

Re: Boot IS Blocked Error in RP8400

Hi ajin,

It seems that some thing wrong with Cell 2.


HW status for Cell 2 : FAILURE DETECTED

Do one thing reset your cell.

1. Connect to MP.
2. CM>PE>C for Cell ...Give cell number and power off and on the cell.

then check the status.

If its the same go ahead and log a HW case with HP.

Regards,
Asif Sharif
Regards,
Asif Sharif
Khairy
Esteemed Contributor

Re: Boot IS Blocked Error in RP8400

hi ajin,

could u get more error logs.

The ones you gave is not sufficient for further investigation. It just tell you power is disconnected and the cell is power off.

But I'm interested to see more events before this line.
17 PDC 0,1,0 *4 0x200043409f00302b 0x00ffff01ff03ff11 BOOT_CPU_DECONFIG

To get this, you should press enter to view next page.

Rgds