HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Boot RP5430 server

 
SOLVED
Go to solution
Highlighted

Boot RP5430 server

If there is power going to the server, but the system is off, can I boot the server using the GSP?

If not can I use remote/network boot, through the LAN, to start the system.

Thanks.
8 REPLIES 8
Asif Sharif
Honored Contributor

Re: Boot RP5430 server

Hi Alexander,

GSP>CM>PE ON/OFF

Regards
Asif Sharif
Regards,
Asif Sharif
Asif Sharif
Honored Contributor

Re: Boot RP5430 server

Sivakumar TS
Honored Contributor

Re: Boot RP5430 server


Hi,

MP>CM>BO -> is to boot the server

MP>CO -> to access the console of the server from MP


With Regards,

Siva
Nothing is Impossible !
Mridul Shrivastava
Honored Contributor

Re: Boot RP5430 server

This will work only when Hard switch is in ON condition then u can turn it ON/OFF remotely using PE.
Time has a wonderful way of weeding out the trivial
YoungHwan, Ko
Valued Contributor
Solution

Re: Boot RP5430 server

Type ^B to go GSP mode

Enter twice to login GSP

GSP> pc -> on -> y
then your system will be boot.

GSP> co
Joshua Scott
Honored Contributor

Re: Boot RP5430 server

On the rp5430, the power switch must be on to toggle power in the GSP.

in the gsp, the command is PC.

Josh

What are the chances...

Re: Boot RP5430 server

Thanks for your comments.

It appears that if the power switch is off there is nothing much that can be done to boot the system other than physically turning the switch on.

What is interesting is that we have a number of other HP servers, about 6 ProLiant GL rack-mounted servers, that can be remotely booted across the network.

I thought the same could be accomplished with the RP5430 server.

Thanks.
Joshua Scott
Honored Contributor

Re: Boot RP5430 server

The key for this server is to leave the power button on, then you can control power with the PC command.

Josh
What are the chances...