HPE 9000 and HPE e3000 Servers
1748179 Members
3946 Online
108758 Solutions
New Discussion юеВ

Re: Boot in single user on V2250

 
SOLVED
Go to solution
Alberto Hurtado
Frequent Advisor

Boot in single user on V2250

How can i boot in single user the system in V2250. I have a recient tape of ignite. Some body had a manual ?

Your aid it's thanked.

Alberto
5 REPLIES 5
Steven E. Protter
Exalted Contributor

Re: Boot in single user on V2250

boot at cosole

interupt at the 10 second prompt

bo


Interact with the ISL Y chose yes


hpux -is
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Steven E. Protter
Exalted Contributor
Solution

Re: Boot in single user on V2250

If you just want to boot off the tape

interupt at the 10 second prompt

sea

Look for the sequential(tape device) lets say its P3

bo P3

N Don't interact


You can still interact with the Ignite recovery. Stay at the console, watch carefully there will be an interupt prompt.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
DIPAK KUMAR ROY
Frequent Advisor

Re: Boot in single user on V2250

HP V servers needs test station (normally a HP workstation) that works as a console for the server. Once you have the workstation configured you can follow steps provided by Steve.

Thanks
Alberto Hurtado
Frequent Advisor

Re: Boot in single user on V2250

in a V2250 the interrupt of boot dont ask if you want interact with ISL only ask for path alternate ....
Alberto Hurtado
Frequent Advisor

Re: Boot in single user on V2250

Yes, thanks my dear friends and masters.
Alberto