HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Booting problem in HP-UX 9000/800/L3000-7x Server

 
gab_in
Regular Advisor

Booting problem in HP-UX 9000/800/L3000-7x Server

Hi,

One of our HP-UX Server is not booting. Please find below the LED Combinations and system details and let me know what could be the possible causes or Can we boot the server without replacing the disk ?

1: LED Combination :

RUN----GREEN BLINKING
ATTENTION ---ORANGE
FAULT---RED
POWER--GREEN

2: System Information:


Model: 9000/800/L3000-7x
Main Memory: 12288 MB
Processors: 3
OS mode: 64 bit
OS Version: HP-UX version B.11.11.


3:

Disk layout:

LVM disk Device file HW Addr size vol. grp
HP 36.4GST336753LC /dev/dsk/c1t2d0 0/0/1/1.2.0 34732 /dev/vg00
HP 36.4GST336753LC /dev/dsk/c2t0d0 0/0/2/0.0.0 34732 /dev/vg01
HP 36.4GST336753LC /dev/dsk/c2t2d0 0/0/2/0.2.0 34732 /dev/vg02
HP 73.4GST373453LC /dev/dsk/c1t0d0 0/0/1/1.0.0 70007 /dev/vg03


Thanks in advance.
3 REPLIES 3
Robert Salter
Respected Contributor

Re: Booting problem in HP-UX 9000/800/L3000-7x Server

Not enough information. The red FAULT is obviously an indicator that there's a problem. Can you access the GSP and then look at the VFP?
Time to smoke and joke
Torsten.
Acclaimed Contributor

Re: Booting problem in HP-UX 9000/800/L3000-7x Server

I agree, the red fault light is caused by a higher level failure event - review the GSP log or contact your HP support to get this solved.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Roberto Arias
Valued Contributor

Re: Booting problem in HP-UX 9000/800/L3000-7x Server

Hardware problem, sure.


In what step are you stopped?check GSP log
The man is your friend