CPUs in rp4440. How to know if its dual core or not

[Basheer_2]

Hello

RP4440
1) How to know how many are installed
2) Are they dual core or not
3) How many more can I add to this.

print_manifest shows 4 Processors

echo "selclass qualifier cpu;info;wait;infolog" | cstm |grep -e "Slot" -e "Processor State" cpu-dual-core.log
Slot Number:0 Processor State:CPU Present Configured
Slot Number:0 Processor State: CPU Present Configured
Slot Number:2 Processor State: CPU Present Configured
Slot Number:2 Processor State: CPU Present Configured

[James George_1]

Hi
Try this command to get the CPU info :

#echo "selclass qualifier cpu;info;wait;infolog" | cstm > /tmp/cpuinfo

Rgds / James

[Pete Randall]

Judging from this link, they have to be at least dual core:

http://www.hp.com/products1/servers/entry_level/index.html


Pete

[Torsten. · Accepted solution]

CPU's in a rp4440 are either PA-8800 or PA-8900 - both are always dual core.

and

you see 2 cores in only 1 slot = must be dual core!

Slot Number:0 Processor State:CPU Present Configured
Slot Number:0 Processor State: CPU Present Configured


You can add 2 more modules = 4 cores.

[tkc]

rp4440 is always dual-core. you have noticed each slots has 2 cpu present in the output.
also the rp4440 specs are here to confirm the answer :

http://h18000.www1.hp.com/products/quickspecs/12034_div/12034_div.HTML