HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Changing the DATE in Management Processor on rp4440

 
SOLVED
Go to solution
Brett Kahn_1
Occasional Visitor

Changing the DATE in Management Processor on rp4440

Anyone know the syntax on how to set the
Date in the Manangement Processor?

Format = DATE [-nc]
What is the proper syntax?

Please provide an example
8 REPLIES 8
Torsten.
Acclaimed Contributor

Re: Changing the DATE in Management Processor on rp4440

Brett,

as far as I know, the time settings in a non-npar system like yours have to be configured at BCH level (COnfiguration menu -> TIme). You may display only the time in MP.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Devesh Pant_1
Esteemed Contributor
Solution

Re: Changing the DATE in Management Processor on rp4440

There is no date setting for the GSP/MP on most of the servers

thanks
DP
Brett Kahn_1
Occasional Visitor

Re: Changing the DATE in Management Processor on rp4440

I was trying to get the system log events have the correct timestamp.

will BCH correct this?

Torsten.
Acclaimed Contributor

Re: Changing the DATE in Management Processor on rp4440

I guess your MP does only show the time and does not allow to change it.
Next time you reboot your server stop at BCH (Boot Console Handler) and check the time setting. I want to explain it that way: In npartition systems (cell based) the MP provides the date/time to each partition or use it's own, but in non-npar systems the MP uses the systems time setting.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Brett Kahn_1
Occasional Visitor

Re: Changing the DATE in Management Processor on rp4440

Thanks for your support!

Torsten.
Acclaimed Contributor

Re: Changing the DATE in Management Processor on rp4440

You are welcome!
How about some points for us?

;-)

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Brett Kahn_1
Occasional Visitor

Re: Changing the DATE in Management Processor on rp4440

Points were given!
timmy b.
Honored Contributor

Re: Changing the DATE in Management Processor on rp4440

Brett, anywhere you see "unassigned" under a reply to your post there have been no points assigned. You need to manually assign points, as you see fit, to each reply. Please don't just give 10 points to each answer, that doesn't help anyone searching on your thread topic.

Here's the points system in a nutshell:

o N/A: The answer was simply a point of clarification to my original question

o 1-3: The answer didn't really help answer my question, but thanks for your assistance!

o 4- 7: The answer helped with a portion of my question, but I still need some additional help!

o 8-10: The answer has solved my problem completely! Now I'm a happy camper!



By the way, you don't need to assign points to my post, it's for clarification only!

Thanks, Tim
There are 10 kinds of people in this world: Those who understand Binary, and those who don't.