Chassic code???

[Veron Le]

Hi,
Now i am facing with chassic code:
DATE 10/03/03 09:02:25
ALERT LEVEL:8=Boot Possible, performance impaired
SOURCE:6=Platform
SOURCE DETAIL: 1=self result
CALLER ACTIVITY:2=operation STATUS:0
CALLER SUBACTIVITY:03=console
REPORTING ENTITY TYPE:1=service processor
REPORTING ENTITY ID:00

Could you pls decode or send me a link where i can decode it.

Thanks
veron

[Robert-Jan Goossens]

Hi Veron,

Plaese add server info.

Looks like you need a gsp upgrade, take a look at next link.

http://www5.itrc.hp.com/service/cki/patchDocDisplay.do?patchId=PF_CCANGSPB0214

SYSTEM NAME:
DATE: 02/17/2002 TIME: 19:46:53
ALERT LEVEL: 8 = Boot Possible, performance impaired
SOURCE: 6 = platform
SOURCE DETAIL: 6 = service processor SOURCE ID: 0
PROBLEM DETAIL: 1 = selftest result
CALLER ACTIVITY: 2 = operation STATUS: 0
CALLER SUBACTIVITY: 03 = console
REPORTING ENTITY TYPE: 1 = service processor REPORTING
ENTITY ID: 00
0x7010028166002030 0B0010FF 00000000 type 14 = Problem
Detail
0x4810028166002030 53415332 52616C70 type 9 = ASCII
Message SAS2Ralp
0x4810028166002030 7372632F 4C4F4765 type 9 = ASCII
Message src/LOGe
0x7010028166002030 0106013C 60000013 type 14 = Problem
Detail
0x58100A8166002030 00006601 11132E35 type 11 = Timestamp
02/17/2002 19:46:53

Regards,

Robert-Jan.

[Hari Kumar]

1.Check the #pdcinfo
2.Check #stm>selall
#stm>loginfo
3.Ctrl+B, GSP>SL ,select Incoming and Error also
4.GSP>xd and select all the tests given there.

If you get any HPMC errors in pdcinfo
Revert,

HTH

[Veron Le]

Hi

This is a rp5400 (A5191B). This server usually encounter a prob that console non-responsive. I always reset GSP card and reset terminal when it happens.

For 2 or 3 months the prob is back.and I must reset again.

Rgds/Veron