HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Cna't access management card

 
SOLVED
Go to solution

Cna't access management card

hp9000
rp3440
HP-UX 11

Hi,
For some reason I cannot access the management card on the server anymore. I used to be able to telnet it ip address but won't connect anymore. I have also tried to connect a console directly to the card but I get no prompt, is there any way to resume this connection without a reboot as it is a critical live System.

Thanks in advance.








3 REPLIES 3
Joshua Scott
Honored Contributor
Solution

Re: Cna't access management card

There is a small 'MP Reset' button beside where the console plugs in. If you press that, it will reset the MP. if that doesn't work, try to hold down the button for about 5 seconds and release it, then see if anything is displayed on the console.

Josh
What are the chances...

Re: Cna't access management card

That worked, Thanks

Re: Cna't access management card

Thnak for your help