Configuration GSP

[sys-sbd]

Hi,
How can I reset all the configuration on GSP card
setted to lan console because I can't loggin on it : I got the following output message when I did a telnet
Sorry, LAN Console access is currently disabled.
Local flow control off
Connection closed by foreign host

This card is connected to a L3000-7x

[Naveej.K.A]

hi,

login to the system...

stty +resetGSP < /dev/GSPdiag1

regds
Naveej

[sys-sbd]

I've already tried it and I got the same effects

[Naveej.K.A]

hi,

U may have to open it.
Open the top cover,

then the plates on the right hand side and you will have access to the GSP card. A red button on the Card will reset it. Its written on the card that it is a RESET switch for the GSP card.

with best wishes
Naveej

[sys-sbd]

I'll try it
Thank you

[Bharat Katkar]

Ramdani,
You lan cosole access is disabled. you need to enable it first.
1. Go to GSP
2. > CM
3. CM> LC

Here you can configure your Lan console port
then
4. CM> EL
Choose A to enable access to LAN Console.

That's all.
This should work.
Regards,

[Bharat Katkar]

Hi ramdani,
"I have assigned points to 0 of 22 responses to my questions" in your profile.
I think you don't about the pts assignment.
Please have a look at the link below:

http://forums1.itrc.hp.com/service/forums/helptips.do?admit=716493758+1085211538437+28353475#33

Enjoy forumming.
Regards,