HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Configure Lan route in Console Admin for one rp8420

 
Carme Torca
Super Advisor

Configure Lan route in Console Admin for one rp8420

Hi,

I would like to configure another lan route for one rp8420.
If I enter in the Console Admin
> CM> IF
I can see one route:

=== Host and network routing tables ==========================================


ROUTE NET TABLE
destination gateway flags Refcnt Use Interface
----------------------------------------------------------------------------
0.0.0.0 172.30.0.1 3 1 17117 ln0
172.30.0.0 172.30.0.220 101 0 0 ln0
----------------------------------------------------------------------------

ROUTE HOST TABLE
destination gateway flags Refcnt Use Interface
----------------------------------------------------------------------------
127.0.0.1 127.0.0.1 5 1 0 lo0
172.30.0.220 172.30.0.1 7 0 0 ln0
----------------------------------------------------------------------------

but I would like to add another router
53.0.0.0 255.0.0.0 .
How could I do this??
I would like to add one route
Users are not too bad ;-)
2 REPLIES 2
Steven E. Protter
Exalted Contributor

Re: Configure Lan route in Console Admin for one rp8420

connect to the console
ctrl-b for GSP
lc

To configure network.

If you can't add it there, I don't think you can do it.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Carme Torca
Super Advisor

Re: Configure Lan route in Console Admin for one rp8420

Hi,

But I have one SuperDome and in it I have more that one route:


=== Host and network routing tables ==========================================


ROUTE NET TABLE
destination gateway flags Refcnt Use Interface
----------------------------------------------------------------------------
0.0.0.0 10.32.9.1 3 1 2380 fei0
10.32.9.0 10.32.9.219 101 0 0 fei0
192.168.2.0 192.168.2.102 101 0 0 fei1
----------------------------------------------------------------------------

ROUTE HOST TABLE
destination gateway flags Refcnt Use Interface
----------------------------------------------------------------------------
10.32.9.219 10.32.9.1 7 0 0 fei0
127.0.0.1 127.0.0.1 5 1 0 lo0
192.168.2.102 192.168.2.100 7 0 0 fei1
----------------------------------------------------------------------------

Does anyone knows who could I add one route??
Users are not too bad ;-)