HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Configure VGA card on rp3440

 
Aezz
Occasional Visitor

Configure VGA card on rp3440

I have the HP900 Server rp3440 but it seems the on bord Viedo card id disable & it requires the extra viedo card to connect dispaly or else I have to live with the serial port & Hyper terminal.

I have bought the the VGA card Part#(A6150B)
I Installted it and the ioscan command can see the additional card as unknow.

When I use SAM to configure the display I got and error message saying graphic display is not present. the also same if I try to configure the X server.
I can use X-Manager to access CDE over the lan, but we need to access this server using the console mainly through the new PCI-VGA Card.

How could I configure the machine to identify the card?
3 REPLIES 3
cnb
Honored Contributor

Re: Configure VGA card on rp3440

Hi,

http://docs.hp.com/en/9551/IOcards_PA_IPF0308.htm

Version of HP-UX?

Version of system firmware installed?

Patches up to date?


Rgds,

Torsten.
Acclaimed Contributor

Re: Configure VGA card on rp3440

Do you have the graphics module included?

# what /stand/vmunix | grep gvid

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Aezz
Occasional Visitor

Re: Configure VGA card on rp3440

# uname -a
HP-UX hp B.11.11 U 9000/800 2970966688 unlimited-user license

# what /stand/vmunix | grep gvid
gvid_dbg.c $Date: 2006/05/29 19:35:11 $Revision: r11.11/7 PATCH_11.11 (PHKL_33369)

[xx] MP:CM> sysrev -nc


SYSREV -nc


Current firmware revisions

MP FW : E.03.32
BMC FW : 03.50
System FW : 45.11



-> Command successful.