HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring a 56k Modem on E35 server

 
Highlighted
Paul Lalli
Occasional Visitor

Configuring a 56k Modem on E35 server

Can some one help me to configure a 56k Modem on to an E35 Sever.

1. totally new configuration.
2. upgrade fro 33k to 56k Modem.
Thanks

Paul Lalli
Solid Systems
lalli@sscs.co.uk
3 REPLIES 3
Robert-Jan Goossens
Honored Contributor

Re: Configuring a 56k Modem on E35 server

Hi Paul,

see if I can locate a doc for you.
HPUX version ?

Robert-Jan
Luk Vandenbussche
Honored Contributor

Re: Configuring a 56k Modem on E35 server

The problem is the layout of the cable between CPU and Modem. If I remember well, i looked in my archives, is this the cable layout

CPU Modem
-------------------------------------------
Gnd 1 ---------- 1 Gnd *
TD 2 <--------- 3 RD *
RD 3 ---------> 2 TD *
RTS 4 <--------- 8 DCD *
DSR 6 ---------> 20 DTR *
GND 7 <--------> 7 GND *
DCD 8 ---------> 4 RTS
9 <--------- 22 RI
DTR 20 <--------- 6 DSR
RI 22 <--------- 5 CTS

I think also that the maximum speed is 19200.
Several at commando may be needed for to configure your modem, depends on the type
Alexander M. Ermes
Honored Contributor

Re: Configuring a 56k Modem on E35 server

Hi there.
Usually the old servers like I70 or so have a connector called MUX. With a HP special cable you can connect the modem to the system.
After that you can configure the modem with SAM.
Rgds
Alexander M. Ermes
.. and all these memories are going to vanish like tears in the rain! final words from Rutger Hauer in "Blade Runner"