HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Connect a dialout only modem to rp7410 REMOTE port

 
SOLVED
Go to solution
Christopher Hildrum_1
Frequent Advisor

Connect a dialout only modem to rp7410 REMOTE port

Has anyone figured out how to use the REMOTE port, connect a modem and dial out? I have tried all the forum stuff but nothing is working. Any ideas ?
4 REPLIES 4
Joerg-Udo Werner
Frequent Advisor
Solution

Re: Connect a dialout only modem to rp7410 REMOTE port

Hello Christoper,

it's not possible to connect a dialout modem to the remote port on the rp7410.
The design has changed in compare with the rp7400. The Remote Port has only a physical (serial) connection to the MP (Management Processor). To connect a dialout modem you a additional MUX card.

Best regards,
Udo
Stefan Stechemesser
Honored Contributor

Re: Connect a dialout only modem to rp7410 REMOTE port

Hi Christopher,

there is no way to dial out on the rp7410 Core I/O remote modem port. This is because there is no internal serial interface the OS can access. This port can only be used to dial in to the MP.
If you do not use an UPS, you can connect a modem to the UPS port for dial out. (ttyd0p2)
This should work.
Alexander M. Ermes
Honored Contributor

Re: Connect a dialout only modem to rp7410 REMOTE port

Hi there.
Additional info :
together with the MUX interface you need the port multiplier for the MUX and the correct cables to connect the modem to it.
If you want to dial in & out, do not use the CCITT setup.
Rgds
Alexander M. Ermes
.. and all these memories are going to vanish like tears in the rain! final words from Rutger Hauer in "Blade Runner"
Mike Roger
Advisor

Re: Connect a dialout only modem to rp7410 REMOTE port

I have one question here. how do you configure the remote connection to dial in. and how do you enable the remote console for that?

Thanks