HPE Community
HPE 9000 and HPE e3000 Servers
1753797 Members
8752 Online
108805 Solutions
New Discussion

Re: Connecting a Compaq EMA12000 to an HP 9000.

 
remove
Occasional Contributor

‎06-13-2001 07:02 AM

‎06-13-2001 07:02 AM

Connecting a Compaq EMA12000 to an HP 9000.

Does anyone have any experience connecting a Compaq EMA12000 to an HP9000, probably an N-class machine? I am being requested to do this, but of course there is no time to test it first. I would like to know if anyone else has tried it and what their experiences were.
0 Kudos
1 REPLY 1
David Vann_2
Advisor

‎12-10-2003 08:52 AM

‎12-10-2003 08:52 AM

Re: Connecting a Compaq EMA12000 to an HP 9000.

We are in the process of doing the exact same thing. We are on HP-UX 11i v1 for an N Class server. We have an EMA12000 with ACS 8.6. We are using SecurePath 3.0a. We are going to give that a try first. The docs say we may have to upgrade the ACS firmware to 8.7S-3 The switch firmware may have to be upgraded as well to 2.6 we are currently on 2.1. We may have to upgrade SecurePath to 3.0c as well. We are testing as we go.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.