HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Console Login

 
SOLVED
Go to solution
Amitav
Frequent Advisor

Console Login

Hi,
How can i go to a console login of a HP server...??
5 REPLIES 5
Amit Parui
Valued Contributor
Solution

Re: Console Login

Try to telnet to MP/ GSP IP for your server and I suppose you are there. Normally by default the ID/Passwd are Admin/Admin..Try and tel me..
If Life gives u a ROCK, its upto u to build a BRIDGE or a WALL !!!
Torsten.
Acclaimed Contributor

Re: Console Login

Just connect to the GSP/MP/iLO via serial line or network, log on and select "CO" for console.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Amit Parui
Valued Contributor

Re: Console Login

Hi (again),

When you reach to the console prompt just type for Help and you can see list of commands..
If Life gives u a ROCK, its upto u to build a BRIDGE or a WALL !!!
Sp4admin
Trusted Contributor

Re: Console Login

You can use telnet which is not a secure session. I would use something like F-Secure and ssh from your PC. The other way would be to setup the GSP port this way you can reboot the server if ever need remotely.

sp,
Server_4
Occasional Visitor

Re: Console Login

HI..

1)Login to Server Via MP
telent to MP ipaddress and type User and Password : Admin
2)Type CO command
3)Press enter and Type Contrl+Ecf
hold Contrl key and type e.
4)After success full you see a console prompt type root with password.