HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Console/Terminal Access to HP 9000 R Series

 
Odell Walker_1
Occasional Contributor

Console/Terminal Access to HP 9000 R Series


What serial port on the HP 9000 R series servers will allow me access via Windows Hyperterm session?

Can I use tip command from Sun to connect to HP 9000 R series servers?

W
2 REPLIES 2
Jeff Schussele
Honored Contributor

Re: Console/Terminal Access to HP 9000 R Series

Hi,

R-series should have a DB9 connector on the back labeled console that should be used for console access. And Yes HyperTerm will work - set for 9600/N/8/1 as that's the default serial parms for the console port.

HTH,
Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
Dave Unverhau_1
Honored Contributor

Re: Console/Terminal Access to HP 9000 R Series

Here's a diagram of the rear panel layout. The console port is the upper serial connector (serial 1). The lower one is for a UPS (serial 2).

I'm not familiar with Sun stuff, so I can't comment on the tip command.

Best Regards,

Dave
Romans 8:28