HPE Community
HPE 9000 and HPE e3000 Servers
1753659 Members
5868 Online
108798 Solutions
New Discussion юеВ

Re: Conversion of rp4440 to rx4640

 
CCIL
Frequent Advisor

тАО06-24-2008 01:36 AM

тАО06-24-2008 01:36 AM

Conversion of rp4440 to rx4640

Hi All,

Good Day.....!!

Is it possible to convert rp4440 to rx4640 only by changing the PA-RISC processor to Intergity processor and by changin any of the dip switches with the existing system board.

Kindly let me know incase it is possible or not.

Waiting for your earliest response.


Thanks & Regards,

A.SanthanaKrishnan
Amit Vichare
0 Kudos
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО06-24-2008 02:33 AM

тАО06-24-2008 02:33 AM

Re: Conversion of rp4440 to rx4640

Yes it's possible, but some more steps are needed.

I would suggest to involve your HP support.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Andrew Rutter
Honored Contributor

тАО06-24-2008 06:06 AM

тАО06-24-2008 06:06 AM

Re: Conversion of rp4440 to rx4640

hi,

you can find the full upgrade guide here

http://www.manualshark.org/manualshark/files/28/pdf_26562.pdf

good luck


Andy
0 Kudos
Sandy Chen
Honored Contributor

тАО06-26-2008 12:15 AM

тАО06-26-2008 12:15 AM

Re: Conversion of rp4440 to rx4640

Yes it is posible.

But you will need hp engineer to do this. If I wasn't wrong, you will need ssconfig to change the system board model name

Regards,
Sandy
I never think of the future. It comes soon enough.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.