HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Conversion of rp4440 to rx4640

 
CCIL
Frequent Advisor

Conversion of rp4440 to rx4640

Hi All,

Good Day.....!!

Is it possible to convert rp4440 to rx4640 only by changing the PA-RISC processor to Intergity processor and by changin any of the dip switches with the existing system board.

Kindly let me know incase it is possible or not.

Waiting for your earliest response.


Thanks & Regards,

A.SanthanaKrishnan
Amit Vichare
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: Conversion of rp4440 to rx4640

Yes it's possible, but some more steps are needed.

I would suggest to involve your HP support.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Andrew Rutter
Honored Contributor

Re: Conversion of rp4440 to rx4640

hi,

you can find the full upgrade guide here

http://www.manualshark.org/manualshark/files/28/pdf_26562.pdf

good luck


Andy
Sandy Chen
Honored Contributor

Re: Conversion of rp4440 to rx4640

Yes it is posible.

But you will need hp engineer to do this. If I wasn't wrong, you will need ssconfig to change the system board model name

Regards,
Sandy
I never think of the future. It comes soon enough.