HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

D class server

 
Rui Medeiros_1
Contributor

D class server

As anyone come across this code being displayed before the system boots up.
CEF2
2 REPLIES 2
Kent Ostby
Honored Contributor

Re: D class server

CEF2 is a boot code that indicates that we are searching for the boot device.

If your system is hanging there then try to boot vmunix.prev.

If booting that kernel fails then its possible that you have a problem with an I/O card.

Best regards,

Kent M. Ostby
"Well, actually, she is a rocket scientist" -- Steve Martin in "Roxanne"
Stefan Stechemesser
Honored Contributor

Re: D class server

This is a normal chassis code generated by the HPUX kernel and means "Kernel is about to configure the I/O system". This is no error, but if the system is hanging for a unusual long time during bootup and this chassis code is displayed, it may be a hint on an I/O problem.

Best regards

Stefan