HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

D350, problem with disk array.

 
Rogelio Cabral
Occasional Visitor

D350, problem with disk array.

I have a HP D350 with HP-UX 10.20, when the server start, it can't mount vg01, that is located at disk array, when I see the rc.log file, i see this:
more rc.log
Old /etc/rc.log moved to /etc/rc.log.old

**************************************************
HP-UX Start-up in progress
Mon Nov 21 14:51:56 CST 2005
**************************************************

Mount file systems
Output from "/sbin/rc1.d/S100localmount start":
----------------------------
mountall: cannot mount /dev/vg01/lvol3
mountall: diagnostics from mount
vxfs mount: /dev/vg01/lvol3 no such device
mountall: cannot mount /dev/vg01/lvol15
mountall: cannot mount /dev/vg01/lvol4
mountall: cannot mount /dev/vg01/lvol2
mountall: diagnostics from mount
vxfs mount: /dev/vg01/lvol2 no such device
mountall: cannot mount /dev/vg01/lvol1
mountall: diagnostics from mount
vxfs mount: /dev/vg01/lvol1 no such device
mountall: cannot mount /dev/vg01/lvol18
mountall: cannot mount /dev/vg01/lvol14
mountall: cannot mount /dev/vg01/lvol16
mountall: cannot mount /dev/vg01/lvol17
mountall: cannot mount /dev/vg01/lvol11
mountall: cannot mount /dev/vg01/lvol10
mountall: cannot mount /dev/vg01/lvol9
mountall: cannot mount /dev/vg01/lvol8
mountall: cannot mount /dev/vg01/lvol7
mountall: cannot mount /dev/vg01/lvol6
mountall: cannot mount /dev/vg01/lvol5
mountall: cannot mount /dev/vg01/lvol12
mountall: cannot mount /dev/vg01/lvol13
mountall: diagnostics from mount
vxfs mount: /dev/vg01/lvol13 no such device
checking quotas

This is the output from /var/adm/syslog

Nov 21 14:52:23 lamvps automount[604]: Automount abort!!!
Nov 21 14:52:23 lamvps automount[604]: Possible cause:
Nov 21 14:52:23 lamvps automount[604]: 1)No map provided
Nov 21 14:52:23 lamvps automount[604]: 2)Using the same map as the running aut
Nov 21 14:52:23 lamvps automount[604]: 3)The maps contain invalid mount pointn

I think, this problem can be harware, but I need to be sure before I try to buy a card for disk array.

2 REPLIES 2
Andrew Rutter
Honored Contributor

Re: D350, problem with disk array.

hi,

can we have abit more info if possible.

is the server up and running on VG00? if so what does ioscan show for the disk/diskarray and i/f's
also what type of disk array is it that you are using.

has anything been done to change the system or just crashed? why rebooted?

Also to start with check all cabling/connections to server and disk array to ensure they are seated ok, not come loose.

post the ioscan output if possible

Andy
Rogelio Cabral
Occasional Visitor

Re: D350, problem with disk array.

Andrew, at this moment, all is OK.
With SAM, put the disk array as LVM (used) after assign it to vg01, after that it run the command mountall from root.

After it all is OK, only to are sure that all is OK, rebooted the server and all is OK.

Thanks for your answer.