HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

D390 & L1000 Gigabits NICs

 
SOLVED
Go to solution
Albatross
Regular Advisor

D390 & L1000 Gigabits NICs

Hi Folks,

We are looking for 1000-BaseT adapters for 2 D390 (HPUX 11)and 1 L1000 (HPUX 10.20) servers. We've searched in PartSurfer and server options, but with no luck so far....

Thanks in advance for your help and insight

SE
5 REPLIES 5
Prashanth.D.S
Honored Contributor
Solution

Re: D390 & L1000 Gigabits NICs

Hi..

Adapter part number for D390 === A3395-69102
(HSC FC 1063 SW Adapter for D-class) Product no : A3591A

Adapter part number for L1000 == A4929-69001 (PCI 1000 BASE -T ADAPT)

Best Regards,
Prashanth
Albatross
Regular Advisor

Re: D390 & L1000 Gigabits NICs

Hi,

Thanks Prashanth, the L1000 options seems OK, but the D390 adapter is Fibre based, not BaseT (copper), any other options?

Thanks a lot for your input,

SE
Jesse Dougherty
Honored Contributor

Re: D390 & L1000 Gigabits NICs

I think the only other 1GB option for the D390 is the A4925A 1000Base-SX EISA Fiber-Channel network interface adapter
Bill Hassell
Honored Contributor

Re: D390 & L1000 Gigabits NICs

The D390 is really old, thus the lack of a current Gbit adapter. The D390 is so slow that you'll not see much improvement in packet throughput even if there was a Gbit interface.


Bill Hassell, sysadmin
Andrew Rutter
Honored Contributor

Re: D390 & L1000 Gigabits NICs

hi,

The fastest made for the D390 in copper was 100bt.

This was either J3515A for a HSC version or A3658A for the Eisa card.
Depending upon what slots you have available


Andy