HPE Community
HPE 9000 and HPE e3000 Servers
1752619 Members
4378 Online
108788 Solutions
New Discussion

Re: DAT 40 not seen with SEA command at BCH main menu

 
amin Tabarak
Advisor

‎03-15-2006 05:57 AM

‎03-15-2006 05:57 AM

DAT 40 not seen with SEA command at BCH main menu

hello,

I have connected a new DAT40 external Tape drive ,to my HP3000 969KS /220, i used the SE SCSI connector, when in BCH main menu , and with sea command i can't get any other path with sequential media description except my internal DDS2 drive.The PDC FW of the server is 2.9.could someone help on this ?
Best Regards,
Amine
0 Kudos
1 REPLY 1
Fred Metcalf
Trusted Contributor

‎03-15-2006 10:04 PM

‎03-15-2006 10:04 PM

Re: DAT 40 not seen with SEA command at BCH main menu

HP e3000 Business Servers Configuration Guide advises:
DDS-4 (Supported on N- and A-Class running 7.0 express 1)
â ¢ SCSI-3 LVDS (Low voltage differential SCSI) interface Ultra2 wide compatible

I do not recall that the SE SCSI port on the 969KS core I/O is compatible.

These DLT drives work, connected to a FWD adapter: C6378A DLT-8000 Desktop drive
C6379A DLT-8000 Rack ready drive
Missing MPE :-)
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.