HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

DC Overvoltage Power Shutdown

 
morganelan
Trusted Contributor

DC Overvoltage Power Shutdown

Hi Unix Gurus,
I have K Class machine, I have tried to hardboot the machine but it showed "DC Overvoltage Power Shutdown" on Front Panel LCD.What the cause of this message?What should I do to solve this problem?Thanks in advance ....
Kamal Mirdad
4 REPLIES 4
RAC_1
Honored Contributor

Re: DC Overvoltage Power Shutdown

Log onto GSP and check poer suplies. (Ps command)

Make sure poer supplies are OK and has no problems.
There is no substitute to HARDWORK
Adisuria Wangsadinata_1
Honored Contributor

Re: DC Overvoltage Power Shutdown

Hi,

When you saw the message below on your K-class front LCD panel :

DC OVERVOLTAGE
SHUTDOWN +X.Y V

This is a problem caused by :

An overvoltage condition has been detected on the specified D.C. voltage (+X.Y)

And the action need to follow are :
1. Replace Power Supply or/and
2. Replace PM card

Call HP and log HW call for this issue.

Hope this information can help you.

Cheers,
AW
now working, next not working ... that's unix
Mahesh Kumar Malik
Honored Contributor

Re: DC Overvoltage Power Shutdown

Hi

Seems to be problem with Power supply or Power Monitor Card. Replace the supply first and then check. Before doing so check input power supply as well

Regards
Mahesh
morganelan
Trusted Contributor

Re: DC Overvoltage Power Shutdown

Thanks for all of you ....
Kamal Mirdad