cancel
Showing results for 
Search instead for 
Did you mean: 

DLT8000 V88

 
stan Jenereski_1
Occasional Contributor

DLT8000 V88

It appears that with V88 of the DLT8000 code when an unload is issued the tape only become ready as indicated by the "tape in use" led.

With V80 the DLT 8000 would unload and light the Green LED which should be correct for C2 security.

my test script...

backup/media=compact/noassist/noinit/ignore=label dka0:[*...]*.*;* mka0:large.bck/save

then....
dismount mka0:

green light never comes on to remove the tape only the tape in use comes on. This has to be incorrect

my thanks
Stan