HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Eisa card on hp ux 10.20

 
SOLVED
Go to solution
Hanwant Verma_1
Regular Advisor

Eisa card on hp ux 10.20

I recently upgrdae my system from hp ux 10.20 to hp ux 11.0 on d200 server. Now when i started the sam the eisa mux card HWP1520 shows in unclaimed state and i cant configure any terminal or modem on this mux card. How can i install this card?
5 REPLIES 5
Andrew Rutter
Honored Contributor
Solution

Re: Eisa card on hp ux 10.20

hi,

check if this software is installed

if not download it from here and install it or from the 11 applications cd's

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=J2467C

it will have the driver for the eisa card or look for the driver for the card on the apps cd J248x

Andy

Luk Vandenbussche
Honored Contributor

Re: Eisa card on hp ux 10.20

Have you update or reinstall you server.
Eisa card are only supported on hpux 11.00 if you install it in 32 bit mode
DCE
Honored Contributor

Re: Eisa card on hp ux 10.20

Unclaimed means the driver is not in the kernel. You will need to rebuild the kernel with the eisa driver in it. If you canot find the driver in the SAM pick list, then you will need to download the driver from HP and install it.

Dave
Jeff Schussele
Honored Contributor

Re: Eisa card on hp ux 10.20

Hi Hanwant,

I agree with Luk.
IF you're running 64-bit 11.0 then you cannot use any EISA devices. They're only active with a 32-bit OS.

Rgds,
Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
Hanwant Verma_1
Regular Advisor

Re: Eisa card on hp ux 10.20

Andrew thanks for your help. Problem solved.

Hanwant