HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

FLT 701A error coming in HP9000 E45 server console

 
Senthil-ahm
Occasional Contributor

FLT 701A error coming in HP9000 E45 server console

FLT 701A error coming in HP9000 E45 server console. unable to boot the server. what will be the cause & what is the solution.
3 REPLIES 3
JASH_2
Trusted Contributor

Re: FLT 701A error coming in HP9000 E45 server console

Senthil,

I have looked up this error, but have been unable to find anything about it. re there any more details you can give me about it.

Regards,

JASH
If I can, I will!
Stefan Stechemesser
Honored Contributor

Re: FLT 701A error coming in HP9000 E45 server console

Hi,

you have a memory error on Dimm 1A.

replace/reseat the Dimm, if this does not help, replace the CPU card.

best regards

Stefan
Senthil-ahm
Occasional Contributor

Re: FLT 701A error coming in HP9000 E45 server console

thanks. there was a memory module faulty.
but now server is unable to boot after ISL prompt. it gives error as "unable to load this utility into memory" & also gives message as "Resetting boot device".

server details: HP9000/E45/4*64MB DIMM(256MB)/2GB SCSI HDD(root disk) & 18GB SCSI HDD/
O/S ver: HPUX 11.0

now after removing 2*64MB server is having only 128MB. whether this may be the problem or any thing else? like root disk is having some problem or vmunix may be corrupted.
Kindly assist me to sort out this issue.