FLT B800 while booting from mirror disk

[Dharmendra Kumar_1]

Dear All,

I hv an K360 Server with HPUX 11.00, It was working fine, because of some issues, I had installed fresh OS,Patches, it worked fine.
After everything tested working fine, finally i had mirrored root disk.

While trying to boot from mirror disk, it returns system panic while kernel loading & gives FLT B800 on console as well on LCD Panel.

At the same time if i boot the server with original (primary disk), it works fine, so i don't suspect any hardware.

Can anybody suggest what could hv gone wrong?

Thanks & regds
Dharmendra

[Lee Tae-kyung]

FLT B800 is 'Power-Failed'.
You should check mirror disk with the command 'diskinfo'.
#diskinfo /dev/rdsk/cXtXdX

I think mirror disk is wrong hardwarely.

Good luck^^

Regards

LTK from korea

[Lee Tae-kyung]

In addition, I'd rather not recommand root disk mirroring on server. Because mirror disk don't protect user's mistakes.
Only mirror disk is useful in case hardware failure.
So, I recommand ignite U/X.^^

Good day^^

[Cheryl Griffin]

FLT B800 indicates a HW failure. You need to have the system checked out. Potentially a bad core i/o card or processor, etc.