HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Fibre Card A6795A with L3000

 
SOLVED
Go to solution

Fibre Card A6795A with L3000

I have a card fiber A6795A to connect to a 9000 HP L3000 When making they ioscan does not show this card to me I would like to know if the fiber card A6795A is formable in a L3000 A6144A?
9 REPLIES 9
Robert-Jan Goossens
Honored Contributor
Solution

Re: Fibre Card A6795A with L3000

rariasn
Honored Contributor

Re: Fibre Card A6795A with L3000

Hi Raphael,

run "xstm" tool information.

The following information was archived during the last hardware scan:

Product : Fibre Channel Interface
Qualifier : HP6795A_Tachyon_XL2
Hardware Path : 0/10/0/0
Device Type : Interface
Device Qualifier : FibreTL

Most Recent Tool Run : Information
Tool Exit Status : Success
Current Status : Success

and,

#ioscan -fnkC fc

fc 0 0/10/0/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
/dev/td0
fc 1 0/12/0/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
/dev/td1

and,

# /opt/fmcs/bin/fcmsutil /dev/td0

Regards,
rariasn
Honored Contributor

Re: Fibre Card A6795A with L3000

Hi Raphael,

run "xstm" tool information.

The following information was archived during the last hardware scan:

Product : Fibre Channel Interface
Qualifier : HP6795A_Tachyon_XL2
Hardware Path : 0/10/0/0
Device Type : Interface
Device Qualifier : FibreTL

Most Recent Tool Run : Information
Tool Exit Status : Success
Current Status : Success

and,

#ioscan -fnkC fc

fc 0 0/10/0/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
/dev/td0
fc 1 0/12/0/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
/dev/td1

and,

# /opt/fcms/bin/fcmsutil /dev/td0

Regards,

Re: Fibre Card A6795A with L3000

The Fiber Channel A6795A was installed in slot 5 of L3000 but is not observed in ioscan - fnkC fc UNDER is a HP-ux 11,00, the fiber channel A6795A is been worth for this server?
Joshua Scott
Honored Contributor

Re: Fibre Card A6795A with L3000

This card will work in the rp5470 under 11.0, I have installed in an identical configuration myself.

please run xstm or mstm, and run the information tool on the CPU, and let us know what the PDC revision is.

Thanks,
Josh
What are the chances...

Re: Fibre Card A6795A with L3000

The Information - PDC Version: 41.36

Raphael
rick jones
Honored Contributor

Re: Fibre Card A6795A with L3000

If the card does not show _at all_ in ioscan as opposed to shows as unclaimed, I'd wonder if the card were properly seated in the slot. Might also try a different slot, and if possible, make sure that card _is_ seen on another system (ie make sure the card is actually good)
there is no rest for the wicked yet the virtuous have no pillows

Re: Fibre Card A6795A with L3000

The card settled in slot 3 and 5, having the same result, were proven in another server of same the characteristics and gave the same result. The PDC is the 41,36, I must change it to 43.43? of being thus, they have some services notes for this change?
Joshua Scott
Honored Contributor

Re: Fibre Card A6795A with L3000

You should upgrade to 43.43 PDC. the card will not show until you upgrade to a minimum firmware level (42.06, I think).

Josh
What are the chances...