HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Fibre Channel card not detected in A500 server (HPUX 11.23)

 
SOLVED
Go to solution
Bharat Katkar
Honored Contributor

Fibre Channel card not detected in A500 server (HPUX 11.23)

Dear Collegues,
I have a A class server...
# model
9000/800/A500-44
I am using HPUX 11.23

I have installed Qlogic FC card (QLA 2340) and powered On the server but it is unable to detect the card.

# ioscan -fn doesn't show me the card.
Could u please let me know if this card is supported and if yes where can i find the dirver for the same.

Thanks in advance,
Regards,
BHarat
You need to know a lot to actually know how little you know
3 REPLIES 3
Stefan Stechemesser
Honored Contributor
Solution

Re: Fibre Channel card not detected in A500 server (HPUX 11.23)

Hi,

this card is not supported under HPUX (only Windows & Linux drivers available from the vendor).
By the way, how did you succeed running HPUX 11.23 on a A500 ? The A500 can run only HPUX 11.11 or 11.0 (PA-Risc) and 11.23 is the IA64 Version of HPUX ;-) On non of the above HPUX versions, the card is supported.

Best regards

Stefan
Bharat Katkar
Honored Contributor

Re: Fibre Channel card not detected in A500 server (HPUX 11.23)

Hi
It is 11.11 and not 11.23...my mistake
Regards,
You need to know a lot to actually know how little you know
Thayanidhi
Honored Contributor

Re: Fibre Channel card not detected in A500 server (HPUX 11.23)

Hi,

Try one these adapters

A5158A or A6795A

TT
Attitude (not aptitude) determines altitude.