HPE 9000 and HPE e3000 Servers
1753437 Members
4951 Online
108794 Solutions
New Discussion юеВ

Re: Firmware patch Error

 
SOLVED
Go to solution
MikeL_4
Super Advisor

Firmware patch Error

I've downloaded Firmware patch: PHSS_36162

PHSS_36162
posted: 2007/03/29
notes: s700_800 11.11 rp4440/rp4410 PDC46.34/BMC04.05/MPE.03.30 FW patchshar
MD5: 4f79e1fe00e17dcbdbed4ce39d3befa6
Checksum: 4159650952 4321482

When I run it through swinstall analysis I am receiving following:

NOTE: One or more Processor RAM FRU(s) has bad data or checksum.
The patch PHSS_36162 will be excluded from installation.
Please contact your HP Representative for assistance in resolving the issue.

Any ideas ??
4 REPLIES 4
Sameer_Nirmal
Honored Contributor
Solution

Re: Firmware patch Error

The error may occur in case the information of FRU like CPU in this case couldn't be retrieved. Run STM info tool and logtool ( ensure it is latest version ). Verify the online CPUs with the actually installed ones.
MikeL_4
Super Advisor

Re: Firmware patch Error

was a hardware issue
Mr  Miroux
Occasional Contributor

Re: Firmware patch Error

Please , i ve a similar problem with an update of my hp 9000 rp 4440

What was your hardware issue,
we 've changed our main board and support board of CPU
MikeL_4
Super Advisor

Re: Firmware patch Error

We resolved our issue by rebooting the server, than we were able to apply the firmware patch without any problem.