HPE Community
HPE 9000 and HPE e3000 Servers
1753792 Members
6447 Online
108799 Solutions
New Discussion юеВ

Firmware upgrade problem

 
Sakui
Frequent Advisor

тАО02-23-2008 10:09 AM

тАО02-23-2008 10:09 AM

Firmware upgrade problem


Hi Guys,
I am upgrading rp 3440 dual core..
I upgraded the PDC firmware with no problem.While upgrading the BMC i got to a place where i don't see anything on the screen.
The Line on the screen was
"Firmware download completed --resetting BMC processor". It took more than two hours with out the system reboot or any thing. The previous IP that was on the MP console is still there. I don't know what to do. There is no system error.What should i do now.

Sak


0 Kudos
2 REPLIES 2
Steven E. Protter
Exalted Contributor

тАО02-23-2008 11:43 AM

тАО02-23-2008 11:43 AM

Re: Firmware upgrade problem

Shalom,

This sometimes happen if you miss an interim upgrade.

If you have not updated in a while there may be intermediate steps required to get the final upgrade in. Its in the notes however.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
0 Kudos
Stefan Stechemesser
Honored Contributor

тАО02-25-2008 12:49 AM

тАО02-25-2008 12:49 AM

Re: Firmware upgrade problem

Hi,

make sure you have enabled the option

F - Allow MP Firmware upgrade via PCI : Enabled

with the "so" => o command of the Management Processor Command Menu.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.