HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

GSP Administrator

 
UNIX Admin Group_1
Occasional Advisor

GSP Administrator

When logging into GSP, we come in as Operator. I see nothing to change to Adminstrator. In Operator, there is no "SO", so we can not add users. How do we change to Adminstrator?
9 REPLIES 9
DCE
Honored Contributor

Re: GSP Administrator

You have to log on as administrator - you cannot switch to it.

The default administrator id is Admin

There is a default password as well.

UNIX Admin Group_1
Occasional Advisor

Re: GSP Administrator

Thanks. It was 'stupidity' on our part. We kept using the wrong password.
UNIX Admin Group_1
Occasional Advisor

Re: GSP Administrator

And if you don't know what the default password is, you can not DC to switch all beck to default. How do you get around this?
DCE
Honored Contributor

Re: GSP Administrator

I beleive you can reset the GSP without resetting the entire system (a reset button on the GSP). That will reset the Admin password back to Admin.
Torsten.
Acclaimed Contributor

Re: GSP Administrator

The default login is "Admin/Admin".

You can restore the defaults in different ways. What system we're talking about?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Ranjith_5
Honored Contributor

Re: GSP Administrator

Hi,

If at all you have a problem with GSP password u can reset with a command as follows.

stty +resetGSP < /dev/GSPdiag1

This will not require a system reboot .

Regards,
Syam
Matti_Kurkela
Honored Contributor

Re: GSP Administrator

The "stty +resetGSP
You must have access to the "local" console when you perform the reset as above. Remote access (modem or network) won't allow this.
While the GSP is resetting, a text like "press to reset the GSP passwords" is displayed on the local console. If you press the indicated key at that point, all the GSP usernames and passwords are reset to factory defaults.
MK
Ranjith_5
Honored Contributor

Re: GSP Administrator

Hi matti,

We dont need console access for resetting the GSP. Can be done from an SSH session.

I have done it 3 days back, when I had a problem in accessing the LAN console.

Regards,
Syam
Mark Nieuwboer
Esteemed Contributor

Re: GSP Administrator

Hi, dispite the answer you can reset the GSP from remote. This is not so if you want to reset to default settings.
This means you must go to the gsp and hold the reset button for 10 seconds. After this you can login with Admin/Admin and make your console acceble from remote.

grtz. Mark